Vintage Classic VIII SM
Vintage Classic VIII SM
Vintage Classic VIII SM Front Grille On
Vintage Classic VIII SM 3Q Grille Off
Vintage Classic VIII SM 3Q Grille On
Vintage Classic VIII SM Rear

Taking us back to the golden days of traditional ‘bookshelf’ loudspeaker design, the Vintage Classic VIII SM standmount model brings all the nostalgic looks and rich performance of the Vintage Classic Series to a compact and easy to integrate loudspeaker. True to the series, the rectangular cabinets are hand-finished with walnut veneer and a deep black baffle, with gold trim and ample design cues from the 1970s. Alongside the 250mm (8”) IsoFlare driver, the design incorporates a dedicated BassTrax porting implementation designed to deliver the very best performance from the 360 degrees LF wavefront while mounted above the floor level on stands. Vintage Classic VIII SM delivers simple, beautiful, and classic looks with a truly contemporary loudspeaker performance.

Coming soon!

Clear

SKU F8000059 Category Tags ,


Share
System Type2 way, downwards firing port, with BassTrax Tractrix diffuser
Recommended amplifier power (Watt RMS)30 - 180
Peak power handling (Watt)360
Continuous power handling (Watt RMS)90
Sensitivity (2.83 Volt @ 1m)91dB
Nominal impedance8 Ohm
Frequency response (-6dB typical in room)34Hz - 34kHz
Drive unit complement1 x 200mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm magnesium dome compression tweeter, ferrite magnet system
Crossover frequency1.8kHz
Crossover typeBi-wired passive low loss, 2nd order low pass, 1st order high pass
System adjustmentsHigh frequency energy (1.8kHz - 26kHz) +/- 3dB, Presence (2.5kHz - 5.0kHz) +/- 3dB
Dimensions - HxWxD540 x 330 x 294mm (21.3 x 13.0 x 11.6")
FinishesWalnut
Cabinet ConstructionHigh density fibreboard, walnut veneered with extensive internal bracing

Notes: Bookshelf dimensions includes grille, terminals, and any plinth, but excludes feet. Floorstand dimensions includes grille, terminals and plinth, but excludes spikes. Subwoofer dimensions include feet. All information was correct at the time of publishing. Fyne Audio Ltd reserve the right to amend details of the specification without notice in line with our policy for continuous improvements.

Privacy Preference Center