F1-10S Floorstander
F1-10S Floorstander
F1-10S Floorstander Walnut Three Quarter
F1-10S Floorstander Walnut Rear

The F1-10S builds upon the original and critically acclaimed F1-10. Distilling Fyne Audio’s decades of Hi-Fi point source loudspeaker expertise into a design of breath-taking acoustic performance, the F1-10S is an eye-watering beauty. Dr Paul Mills and his development team have reimagined the crossover and upgraded the 250mm (10″) IsoFlare driver to include FyneFlute technology. Combined with the twin cavity BassTrax ported cabinet, the result is an enhanced bass reaching down to 26Hz. Featuring a 75mm titanium dome compression tweeter, the 10” IsoFlare driver offers a seamless, time aligned HF response to over 26kHz for ultimate realism and listener engagement. The F1-10S’s very high sensitivity (94dB/W ensures exceptional dynamic range and compatibility with the widest range of amplifiers from single ended triode valve models to the highest power solid state designs. The BassTrax porting and high quality potentiometer controls for HF energy and presence ensure the F1-10S will deliver optimum performance irrespective of room size or placement. Designed, hand crafted and hand finished at Fyne Audio’s UK manufacturing facility the sumptuous lacquered burr walnut finish of the F1-10S offers a bold statement in loudspeaker design for the audiophile.

Clear

SKU F8000061 Category Tags ,


Share
System Type2 way, downwards firing port with BassTrax Tractrix diffuser
Recommended amplifier power (Watt RMS)20 - 280
Peak power handling (Watt)500
Continuous power handling (Watt RMS)140
Sensitivity (2.83 Volt @ 1m)94dB
Nominal impedance8 Ohm
Frequency response (-6dB typical in room)26Hz - 26kHz
Drive unit complement1 x 250mm IsoFlare point source driver with FyneFlute surround, multi-fibre bass / midrange cone, with 75mm titanium alloy dome compression tweeter, neodymium magnet system
Crossover frequency750Hz
Crossover typeBi-wired passive low loss, 2nd order low pass, 2nd order high pass, Deep Cryogenically Treated
System adjustmentsHigh frequency energy (750Hz - 26kHz) +/-3dB Presence (2.5kHz - 5.0kHz) +/- 3dB
Dimensions - HxWxD1191 x 405 x 581mm (46.9 x 15.9 x 22.9”)
Weight - Each57.7kg
FinishesPiano Gloss Walnut

Notes: Bookshelf dimensions includes grille, terminals, and any plinth, but excludes feet. Floorstand dimensions includes grille, terminals and plinth, but excludes spikes. Subwoofer dimensions include feet. All information was correct at the time of publishing. Fyne Audio Ltd reserve the right to amend details of the specification without notice in line with our policy for continuous improvements.

Privacy Preference Center