Skip to main content

GET THE MOST FROM YOUR SUPERTRAX


The SuperTrax works at its optimum with our IsoFlare point source driver, however any loudspeaker will see improvements in sound. The SuperTrax is a time aligned omnidirectional super tweeter, which means that the reflected energy in the room has the same harmonic structure as the direct on axis energy.

It's this time alignment that brings a perceived sense of air and space, so getting the correct position on top of your speaker is important to get the very best from your SuperTrax.

POSITIONING

To start, make sure it is set back from the front of the loudspeaker according to the reference table found below. This aligns it to the acoustic point source location for these Fyne Audio models.

 

If using with other brands of point source driver, we suggest a similar placement according to driver size, though some experimentation may be required to achieve the optimum results.

 

Significant performance gains are still apparent with discrete speaker systems, we recommend positing the SuperTrax at the front of the cabinet with such loudspeakers.

POSITIONING REFERENCE TABLE


ProductSuperTrax Position (from cabinet front edge)
F1-10S84mm (3.3")
F1-12S109mm (4.3")
F1-845mm (1.8")
F1-8S45mm (1.8")
F500S20mm (0.8")
F500SP20mm (0.8")
F501E20mm (0.8")
F501S20mm (0.8")
F501SP20mm (0.8")
F502S37mm (1.5")
F502SP37mm (1.5")
F70022mm (0.9")
F70140mm (1.6")
F701SP39mm (1.5")
F70240mm (1.6")
F702SP39mm (1.5")
F70370mm (2.8")
F703SP94mm (3.7")
F70495mm (3.7")
F704SP95mm (3.7")
Vintage Classic Gold VIII SP55mm (2.2")
Vintage Classic Gold X SP86mm (3.4")
Vintage Classic Gold XII SP112mm (4.4")
Vintage Classic Gold XV SP118mm (4.6")
Vintage Classic VIII50mm (2.0")
Vintage Classic X82mm (3.2")
Vintage Classic XII106mm (4.8")
Vintage Fifteen154mm (6.1")
Vintage Ten100mm (3.9")
Vintage Twelve139mm (5.5")

Privacy Preference Center