£22,999.99

(per pair)

The F1-10 distils Fyne Audio’s decades of HiFi point source loudspeaker expertise into a design of breath-taking acoustic performance and eye-watering beauty. Its 250mm (10″) IsoFlare driver and twin cavity BassTrax ported cabinet deliver bass down to 28Hz while the 75mm titanium dome compression tweeter offers seamless, time aligned HF response to over 26kHz. The F1-10’s very high sensitivity (94dB/W) ensures exceptional dynamic range and compatibility with the widest range of amplifiers from single ended triode valve models to the highest power solid state designs. The BassTrax porting and high quality potentiometer controls for HF energy and presence ensure the F1-10 will deliver optimum performance irrespective of room size or placement. Available in traditional lacquered burr walnut finish with plinth top, the F1-10 offers exemplary finish and a bold statement in loudspeaker design for the audiophile.

Clear

SKU F8000000 Categories , Tags ,


Share
System Type2 way, downwards firing port with BassTrax Tractrix diffuser
Recommended amplifier power (Watt RMS)20 - 280
Continuous power handling (Watt RMS)140
Sensitivity (2.83 Volt @ 1m)94dB
Nominal impedance8 Ohm
Frequency response (-6dB typical in room)28Hz - 26kHz
Drive unit complement1 x 250mm IsoFlare point source driver, multi-fibre bass / midrange cone, with 75mm titanium dome compression tweeter, neodymium magnet system
Crossover frequency750Hz
Crossover typeBi-wired passive low loss, 2nd order low pass, 2nd order high pass, Deep Cryogenically Treated
System adjustmentsHigh frequency energy (750Hz - 26kHz) +/-3dB Presence (2.5kHz - 5.0kHz) +/- 3dB
Dimensions - HxWxD1191 x 405 x 581mm (46.9 x 15.9 x 22.9”)
Weight - Each57.7kg
FinishesPiano Gloss Walnut

Notes: Bookshelf dimensions includes grille, terminals, and any plinth, but excludes feet. Floorstand dimensions includes grille, terminals and plinth, but excludes spikes. Subwoofer dimensions include feet. All information was correct at the time of publishing. Fyne Audio Ltd reserve the right to amend details of the specification without notice in line with our policy for continuous improvements.

Privacy Preference Center